Laying ceramic tiles makes the kitchen more beautiful and stylish, but now, tiles can help you solve some of the common problems encountered in the kitchen, it does not serve two purposes. Then take a look at how to solve these problems!
Problem 1: Dirty oil on the wall
Crack method: Generally speaking, the kitchen wall tiles are suitable for the selection of light glazed tiles, because such bricks are not easy to suck and stain, and it is more convenient to clean. In addition, the gap between the bricks and bricks can not be too large, so that the decoration guidance: clever use of ceramic tiles to crack the kitchen wall surface problems also contribute to future cleaning and conservation. If you choose antique tiles to do the seaming and paving, after filling in the seaming agent and waiting for it to dry out, you need to dip a special sealant (or clear paint) with a writing brush to paint the surface of the seaming agent in the gap left once. The protective layer of the seaming agent is formed so as to avoid contamination and erosion by fumes in the future.
Challenge 2: The ground is slippery and stagnant
Crack method: In the choice of kitchen floor tiles should pay attention to two aspects: First, the floor tile is more slippery, it is best to choose a slightly bumpy or non-slip surface treatment of the brick; second floor tile specifications do not exceed 350cm × 350cm, or when doing slopes Inconvenient to handle, easy to use water in the future.
Problem 3: Thermal expansion of tiles
Cracking method: tile paving for its future use in the expansion, cracking plays an important role. In general, kitchen tiles are wet-laid, and tiles are dry-laid. The standard paving program for wall tiles is: grass-roots sweeping treatment - plastering ash - selecting bricks - immersing - arranging bricks - bouncing - sticking standard points - affixing tiles - sewing and squeezing - cleaning .
It is necessary to pay special attention to the fact that the wall tiles must be soaked for more than two hours before they are affixed to the tiles. The bricks must not be exposed to blisters before they are removed for drying. When sticking, it should be bottom-up, leaving a gap of about 1 mm between the brick and the brick to prevent it from swelling.
Experiences Renovation Experience Home Improvement Precautions Paint Kitchen Wall Tiles Antique Tiles Tiles Plastic Kitchen Tiles Tiles Specifications
Fused Silica Bi-convex Lenses,N-BK7 Bi-convex Lenses,bi-convex lens,bi convex lens,focal length of biconvex lens
Our company can produce many kinds of flat convex Spherical Mirrors with different sizes, radii and base materials, flat convex spherical Mirrors, flat concave spherical mirrors, double convex spherical mirrors, double concave spherical mirrors, meniscus spherical mirrors and other ordinary spherical mirrors. Special spherical mirror can also be processed, such as: achromatic spherical mirror, aspheric surface and spherical mirror group.
Materials: optical glasses such as flint glass, ultraviolet fused quartz and infrared fused quartz, as well as optical crystal materials such as calcium fluoride (CaF2), germanium (Ge), Zinc selenide (ZnSe) and silicon (Si)
Focal length: ±5mm -- ±1000mm±1%
(Germany TIROPTICS OPTOMATIC2000 test)
Outer circle: 4mm -- 200mm±0.1mm
Center thickness tolerance: ±0.1mm
Center deviation: 3-5 points
Surface accuracy: /2@
Surface quality: 40/20
Effective diameter: 90%
Plating film: according to customer requirements can be coated
In addition, we have more than a thousand kinds of standard products, and some of the standard products in stock to meet your needs
Fused Silica Bi-Convex Lenses,Spherical Contact Lenses,Telecentric Lens,Telecentric Scan Lens
Gold Dragon Optics Electronic Technology CO.,Ltd , https://www.golddragon-optics.com