1, working pressure 40 Mpa, pressure gauge dial Φ150, accuracy of 0.4 level, range 1Mpa. 2, the use of introduction: clean water. 3, pressure pump body, all kinds of joints, pressure pump pipe and water tank materials, etc.: All materials in contact with water must be stainless steel 1Cr18Ni9Ti material. 4, the bottom of the tank should have a water switch, easy to clean. 5, the pressure test pump suction port filter precision 40um. 6, the work pressure is stable, the pressure to the requirements, during packing, not allowed to leak, work, should be able to pressure relief. 7, test pump operation, easy maintenance. 8, with the appropriate repair parts.
Alloy Pump Head Plunger Metering Pump
* Different material of the liquid end to meet of different liquid.
* Double or Triple pump heads are available.
* Liquid temperature range is not over than 250 degree.
*The pressure up tp 50Mpa
* The capacity flow up to
200L/H
*The
flow can be adjusted from 0-100% while it's running or
stopped.
Alloy Pump Head Plunger Metering Pump,Widely Used Alloy Pump Head Plunger Metering Pump,Big Alloy Pump Head Plunger Metering Pump,Small Alloy Pump Head Plunger Metering Pump
Zhejiang Ailipu Technology Co., LTD. , https://www.alipu.com
