Recently, due to the influence of transportation and other factors, the supply of sand cement on the market has been tight and prices have increased significantly. In view of this, many home improvement companies began to promote the use of tile adhesives to replace the way of laying cement mortar, the so-called thin paste method. However, many owners are confused about this. What is the thin paste method and how does it differ from traditional cement mortar paving methods? Today, we invite experts to show you the process and differences between the two.
Traditional crafts
Tips
Paving methods have their own advantages and disadvantages
The quality of traditional paving materials is difficult to control, and cement quality, sand thickness and mud content are difficult to control. In the proportioning process of cement mortar, whether the ratio is reasonable, whether the amount of material is in place and whether the mixing is uniform will affect the quality of the cement mortar, resulting in the quality problems of plastering and tiling. During the operation, the worker's skill is higher, but the cost is lower.
The thin paste method material is a tile adhesive, which can be used directly with water, and the quality standard is easy to control and have high bonding strength. The workers are easy to operate and the brick laying efficiency is greatly improved. However, the thin-paste method needs to perform leveling treatment on the wall first, and has more procedures than cement mortar paving. This part requires higher labor costs; in addition, at the time of parity, the cost of tile adhesive is much higher than that of ordinary cement mortar.
Paving brick preparation stage
Whether it is a new thin paste method or a traditional paste method, it is necessary to first perform the base layer treatment and pull the hair on the wall.
The first step of basic inspection and processing
Different base wall treatments are handled differently. Shear wall, that is, reinforced concrete cast-in-place wall, this type of wall needs surface chiseling. Wang Yan, Manager of Dongyi Risheng Engineering Department, explained that due to the surface release agent, it is easy to cause the problem of wall separation, plastering and screeding. If it is a masonry plastering wall, it is necessary to judge the surface plastering of the wall. Whether the floor is empty or not, if it is empty, it must be repaired first; if it is a light partition, it needs to be based on the firmness of the wall, and it is recommended to do the net processing to ensure the strength and to prevent cracking.
The second step of hair processing
After wetting the wall, weave the wetted wall with cement with 108 glue.
Traditional brick laying
Tile laying method using cement mortar as a binder. Compared with the thin-paste method, the conventional paving method does not require the leveling process of the wall surface. After the wall surface is finished, the ceramic tile can be paved.
The first step matching brick
According to the proportion of cement sand 1:2.5, the cement sand was dry mixed and mixed with water. Apply cement mortar to the back of the water-soaked tiles, and then place the bricks on the well-wetted damp wall. After the tiles are placed on the wall, no big adjustments can be made. If they are peeled off, the old cement mortar can be scraped off and reapplied.
The second step of water conservation
In order to ensure the combination of the cement mortar with the wall and the bricks, after the bricks are laid, it is guaranteed that the water will be maintained in the morning and at night twice a day for three days (that is, the right amount of water is sprayed on the wall tiles), and inspections are usually accepted after three days.
Tile decoration company cement home improvement tile price tile adhesive
Extraposition Digital Led Strip
The driver IC is placed on the led strip, and the lad strip and the Driver IC are each formed into a separate body.
The advantage is that the circuits are dispersed and the external circuits are self-contained, which reduces complex circuit design and reduces internal components.
At the same time, the failure rate is also reduced, and the performance of the led strip is more stable.
The rate of non-performing is greatly reduced. The three primary colors of each pixel can achieve 256 levels of brightness display,
serial cascade interface, and can receive and decode data through signal lines. The color of the light is highly consistent and cost-effective.
Generally used for LED full color luminous word string, LED full color module, LED full color soft light strip hard light strip, Led Pixel Screen, LED shaped screen and so on.
It is one of the most common ribbons on the market. The signal is stable and suitable for large-scale engineering design.
Digital RGB LED Strip,Digital LEDTape,5050RGB LED,Extraposition Digital LED Strip
SHEN ZHEN SEL LIGHTING CO.,LTD , https://www.sel-lighting.com