The choice of lighting is safe <br> The light is a problem that any wardrobe needs to consider, therefore, the light configuration should not only ensure the illumination, but also should pay attention to its heat, it is best to choose the built-in light bulbs, plus the lamp more lighting fixtures Appropriate, so as to avoid safety hazards, the location of the switch installation should also be considered.
The locker room design should start from ergonomics <br> The walk-in locker room design emphasizes the rationalization and humanization of the collection function. The locker room is mainly assembled from plates. Although the process is not complicated, it is not easy to do well.
Create cloakrooms of different styles according to the homeowner’s lifestyle and preferences.
The homeowner should make the overall design according to the overall lighting, color, and material before the house is renovated. After the plan is confirmed, it should be done together with the home improvement. This can avoid problems such as corners that are supposed to be carpeted because they have already been tiled.
Avoid cluttering your clothing
Because the closet in the walk-in locker room adopts an open form, all the clothes are exposed to the outside and it is easy to be messy and messy. Therefore, the split board must be reasonable. Before the split board is partitioned, the size of the object to be placed can be fully analyzed, including length, body, weight, etc., which are commonly used, which are spare, and who are suitable for the above. Suitably placed below, placed to pick up is convenient, such as this and other issues, and then, based on these analysis, create a shelf partition map.
Pay attention to the selection of sophisticated hardware <br> These hardware is an important part of the quality assurance, if only a cheap moment, it will cause trouble after maintenance. Designing a sitting pier or telescopic pull bar in the locker room is a humanized design when it is possible to sit and hang when replacing clothes.
Install the cabinet to keep the size
The size of the cabinet should be at least 5 cm in size with the surrounding wall to facilitate installation in the field. The so-called tight seam is actually a misunderstanding.
Do a good job of moisture treatment <br> Most building design ideas will put the storage room closer to the kitchen and toilet, at least one wall is like this, if the homeowner's locker belongs to this category, moisture problems appear to be Especially important. First of all, to be waterproof in the adjacent bathroom or kitchen, and then, in the use of the kitchen, put some moisture-proof agent.
Considering whether a small environment is suitable for a walk-in locker room. <br><br><br><br><br><br><br><br> Before deciding to make a walk-in wardrobe, the homeowner should analyze whether its external environment is suitable for a walk-in locker room, such as whether there is a street in the room, whether the balcony is a double-layer window, and whether there is a door between the balcony and the room. And other issues.
The size of the space occupied <br><br><br> The formation of the wardrobe usually has two kinds: one is the building itself is divided out, one is divided by themselves or designers, re-divided space, in fact, the latter in space and No need to be big, enough to use. Some clothing that is hardly worn at all, it is best not to take up space. After finishing, please remove them all. This is the best manifestation of the activity space.
Decoration Carpentry Knowledge Villa Design Space Effect Picture Space Room Switch Decoration Design Home Decoration Style Cabinet Cupboard Door Locker Closet Door Kitchen Door Closet Bathroom Door Bathroom Door Size Bathroom Size Overall Bathroom Bathroom Design Toilet Waterproof Bathroom Tile Cloakroom Size
Vertical Universal Friction And Wear Testing Machine
Wear Tester,Lubricity Testing Machine,Vertical Universal Friction Tester,Oil Material Tester
Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com