In modern home decoration, how to fully reflect the comfort and safety of the bathroom is a major focus. There are many details involved in the decoration of the bathroom, and there are also some misunderstandings in the decoration. If these problems are not handled properly, it will not only affect the quality of home life in the future, but will also affect the mood of family members.
Zhengshan bathroom hardware    Wrigley bathroom
Three errors in bathroom decoration:
Myth #1. The choice of sanitary ware is not in accordance with the size, which is inconvenient when it comes to "convenience".
In recent years, in the renovation cost, the proportion of consumers’ spending on bathroom renovations has been increasing. Currently, it is understood that only the cost of purchasing the sanitary ware will account for 1/1 of the total renovation cost. 8 or so. However, due to the wide variety of products on the sanitary ware market, consumers often spend their time picking their eyes. After buying a home, they find that the Chengdu ware purchased by them is in harmony with the bathroom. For example, in the market, very beautiful washbasins were selected, but after returning home, they found that they were larger and occupied part of the toilet, making the tissue boxes and the trash can not “separateâ€, and the result was “every time†It is not convenient when it is convenient.
It is best to consider what kind of products to buy in the design stage. During the construction, you can reserve space, change the piping, create installation conditions according to the specific installation requirements and technical parameters of the products you purchase, and ensure the smoothness of the decoration process. Finished, sanitary products can be installed and used normally. In addition, the installation of sanitary ware requires very accurate measurement data, that is, a difference of 1 cm may also require secondary rework, so be sure to ask a professional to measure the size, not sloppy.
Myth #2: Ignoring the problem before construction, modifying it while constructing it, and making no alteration to the water circuit, leaving hidden problems for subsequent construction.
Under normal circumstances, the decoration company will draw a decoration design drawing for the owner, including the overall renderings, detailed construction drawings and water circuit transformation plans. However, due to inadequate communication between the owners and the designers in advance, some of them were not conscientious. With the progress of the construction, they constantly proposed amendments to the original design. As a result, the construction of the water conservancy system and other concealed projects were completed but they found no plans. Follow-up, leaving hidden dangers for subsequent construction.
Specially reminded that if the bathroom needs to be transformed into a water circuit, consumers should ask the designer for a circuit renovation plan in advance. If there is a change in the construction process, consumers must communicate with the designer and draw a remodel. Figure, and then start the construction, it is best not to modify the side of the construction, so as not to damage the wire in the future when the construction of the wall caused disaster.
Misunderstanding III. The design is not flexible. A slight error in construction can cause a series of rework.
This situation is more common in the bathroom. If the socket on the wall is fixed, it is found that the height of the ceiling is exactly in conflict with it, but at this time the tiles have been attached and it is difficult to change. Also, if the wash basin is installed in place, it is found that the pipeline cannot pass normally and only a few more bends are required to pass out of the bathroom cabinet.
Remind consumers to consider whether existing designs and future construction are feasible and flexible before purchasing sanitary products. If the faucet needs to embed a suitable water supply pipe, the bathroom cabinet requires sufficient space for installation. The toilet wall needs to consider the wall distance, the shower room needs to consider the load-bearing wall, the location of the floor drain should be appropriate, etc. These conditions must be considered before the home improvement. Good job, otherwise sanitary products can not be installed and used.
Bathroom decoration needs to pay attention to nine details:
1. Ceiling: Because of the heavy moisture in the bathroom, choose materials that have waterproof, anti-corrosion, and anti-rust properties.
2, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tile is laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.
3, sanitary ware installation: the best in the decoration before the water hole distance, according to the size of the selected bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet installation should be used to sit The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
4, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
5. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-resistant, hi-potted pots to be placed in the bathroom, making it a little more angry.
6. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety. The wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
7, the waterway transformation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.
8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air.
9, wall: wall tiles should also be good moisture-proof waterproof, and to ensure that the tile leveling, and to be seamed with the floor tiles, alignment, in order to ensure the integrity of the wall surface and the ground; if encountered the water supply pipeline exit The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
Bathroom Notes Zhongyu Sanitary Window Space Socket Home Bathroom Decoration Ceiling Renderings Decoration Finding Decoration Company Haoying Bathroom Decoration Design Bathroom Decoration Drawing Home Decoration Effect Picture Glass Tile Glass Sliding Door Glass Door Bathroom Sliding Door Bathroom Tile Bathroom Door Toilet Ceiling Material Toilet Wall Tiles Bathroom Door Size Bathroom Size Bathroom Design Drawings Bathroom Ceilings Bathroom Wash Basins Integral Toilet Bathroom Design Toilets Waterproof Bathroom Tiles Home Furnishing Home Furnishing Design Tiles Rubber Decoration Home Decor Tiles
We are a professional manufacturer of hydraulic accessories for crawler excavators Professionally provided aftermarket customers with various brands of crawler Excavator Final Drive, Travel Motor , Travel Gearbox, Swing Device , Swing Motor , Swing Gearbox ,hydraulic pump, main Control Valve and other accessories.Strictly controlling the quality acceptance of each product Standards to ensure high-quality qualified export of each product.At the same time, we can customize the production services of the products through the drawings according to customer needs, and make every effort to make the perfect product in the mind of each customer.
Professional Small Hydraulic Cylinder manufacturer is located in China, including Telescopic Hydraulic Cylinder,Excavator Bucket Cylinder,Excavator Arm Cylinder, etc.
If you want to know more about our products in more detail, please click on the product details to see more information about product quality, price, packaging, transportation, etc., or you can directly click on Contact Now on the page to talk to us directly. Looking forward to starting long-term business cooperation with you!
Small Hydraulic Cylinder,Telescopic Hydraulic Cylinder,Excavator Bucket Cylinder,Excavator Arm Cylinder
Jining Juheng Hydraulic Machinery Co., Ltd. , https://www.sdjuhengmachine.com