Analysis of Cutting Thickness of Different Materials by 500W Fiber Laser Cutting Machine

500w fiber laser cutting machine for different materials cutting thickness analysis 500w fiber laser cutting machine for different materials cutting thickness analysis For the processing of metal sheets, fiber laser cutting machine has always been recognized as the fastest laser processing equipment. For different metal materials, the processing capabilities of fiber laser cutting machines are different. Let us introduce the cutting thickness analysis of different materials for 500w fiber laser cutting machine.

In general, according to theoretical calculations, an additional 1 mm thickness can be cut for every 100 w of power added. Therefore, according to the theoretical value, the 500w fiber laser cutting machine can cut 5mm metal material. But is the actual situation like this? In fact, when the equipment is in operation, when the electric energy is converted into light energy and then converted into heat energy, there will be a certain energy loss, so when the actual cutting, the ideal theoretical value cannot be achieved. So, how big is the cutting capability of the 500w fiber laser cutting machine?

Wuhan High Energy Laser is a company specializing in the research and manufacture of laser cutting machines. Based on years of experience, we will share an actual cutting parameter (in the case of guaranteed cutting speed):

Carbon steel: Because of its high carbon content, the material is relatively soft and easy to cut. Generally, the cutting thickness can reach 4mm.

Stainless steel "target=_blank> stainless steel: the material is harder, harder to cut than carbon steel, and the general cutting thickness can reach 3mm.

Copper and aluminum: belong to high-reflective materials, which are relatively difficult to cut materials (damage to lasers, long-term cutting is not recommended), and the general cutting thickness can reach 2mm.

The above is the "500w fiber laser cutting machine for the thickness analysis of different materials" from Wuhan High Energy Laser. To learn more about the cutting thickness of the fiber laser cutting machine (adding auxiliary gas), you can consult our professional customer service staff.

This article was published by Wuhan High Energy Laser Editor. Please indicate the source: http://?fnew/i1749 http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj. Com.cn

Biaxial Geogrids

Item	TGSG15-15	TGSG20-20	TGSG25-25	TGSG30-30	TGSG35-35	TGSG40-40	TGSG45-45
Longgitudinal Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Transverse Tensile strength ≥ (KN/m)	15	20	25	30	35	40	45
Longitudunal Elongation ≤ (%)	15
Transverse Elongation ≤ (%)	13
Longitudinal Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Transverse Tensile strength at 2% strain ≥ (KN/m)	5	7	9	10.5	30	30	30
Longitudinal Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Transverse Tensile strength at 5% strain ≥ (KN/m)	7	14	17	21	24	28	32
Width ≤ (m)	6

Feature:

● Increase the bearing capacity of the roadbed and foundation and prolong their service life.
● Prevent road surface and foundation from sinking or flawing, keep clean and beautiful ground surface.
● Convenient construction saves time and labor, reduce mounting time and decrease maintenance expense.
● Prevent culverts from flawing.

● Enhance earth slope and prevent water loss and soil erosion.

● Decrease underlayer thickness and save manufacturing cost.

● Enhance the stability of side slope turf net patch to improve greening.
● Replace wire netting used in mine as intermediate ceiling netting.

Product Application

Reinforced soil engineering Reinforced soil retaining wall, steep slope and the reinforcement and consolidation of the soft ground.

Road construction Ground treatment, reinforcement of the bridge abutment, reinforcement of the enbankment, reinforcement of the pile-net roadbed.

Irrigation projects Protection of port, approach lane, seabeach, channel, river channel, dam and other irrigation projects.

Enviromental projects Land reclamation, prevention and controlling of the desertification, and the composite protective structure in the landfill sites of urban garbage and waste.

Mine engineering Coal mines, side slope protection of opencast mines, slope protection for the dumping site of the opencast mines,reinforcement to counter dam in the large tailing ponds of the metallurgical mines.

Soil engineering Construction of stuffing and package system of heavy soil engineering.

Slope protection Slope protection in the area affected by earthquake.

Dump leaching Ground consolidation of large dump leaching and slag site.

FAQ
Q : Are you a factory or trading company?
A : We are a professional manufacturer that specialized in geomembrane, geotextile, Composite Geomembrane etc with ISO9001.
certificate more than 15 years.
Q : Where is your factory located? How can I visit there?
A : Our facoty is located is No.10 Yuanshan Road High-tech Development Zone, Laiwu District, Jinan City China. You can take the
plan to Jinan Yaoqiang International Airport, then we can pick you up.
Q : Could you send the sample before order confirmation?
A : Yes, we'd love to send a free sample to you for an evaluation if you need.
Q : How about the delivery time?
A : General within 3-7 days after received the deposit.
Q : Can you produce the product according to customers' requirements?
A : Sure, we are professional manufacturer, OEM and ODM are both welcome.
Q : Are you the Gold and Assessed supplier on alibaba?
A : Yes. We are the gold and assessed supplier on alibaba and has got the factory report by SGS.

Plastic Geogrids,Plastic Biaxial Geogrid,Civil Engineering Geogrid,Plastic Civil Engineering Construction Grid

Shandong Jinruixiang Geotextile Material Co., Ltd , https://www.jrxgeosynthetics.com