Solid wood furniture itself has the advantages of thick and solid, exquisite texture, health and environmental protection, and durability. With more and more diversified designs, it has become more and more popular in home decoration in recent years. However, inevitably, in the process of daily use, we will also encounter the unique maintenance problems of solid wood furniture. Now we will introduce some solid wood furniture maintenance to you, and build a beautiful home together. Precautions: 1. The most suitable placement temperature for solid wood furniture away from heat sources is 18 to 24 degrees. If the temperature is too high or too low, the service life of the furniture will be affected. Therefore, to avoid placing the furniture close to the heat source or the air conditioning tuyere, even in winter, it is best to place the furniture about 1 meter away from the heating flow to avoid long-term baking, thus preventing local cracking and deformation of the wood. . If it needs to be placed close to the heating, some heat-resistant substances can be used to separate it from the furniture to avoid damage. 2. Avoid sun-dried solid wood furniture. Under long-term illumination, ultraviolet rays may cause fine cracks on the surface of the coating, or blackening or fading may occur. Therefore, the furniture should be placed in direct sunlight, and if necessary, curtains can be used to block the sun. 3. The humidity of anti-moisture solid wood furniture should be kept within the environment of 35 degrees to 40 degrees. If the furniture is left in a damp environment for a long time, some parts of the solid wood, such as the front of the solid wood drawer, will be deformed due to expansion. So if the home is too humid, you can use a dehumidifier to handle the humidity of the air to make the air dry. If it is a bungalow or a low-rise house, the floor should be properly padded if it is wet, otherwise the legs will be easily corroded by moisture. In the wet summer, it is best to use thin glue to separate the furniture from the ground, while keeping the wall of the furniture at a distance of 0.5-1 cm from the wall. 4. Anti-scratch solid wood furniture surface should avoid rubbing with hard objects, so as not to damage the paint surface and wood surface texture. For example, when placing decorative items such as porcelain bronzes, be careful. It is best to put a soft cloth. And the furniture surface avoids placing too heavy items for a long time, otherwise the furniture will be deformed. 5. Anti-oil for the solid wood dining table, when dining, it is best to cover the surface of the table cloth, try not to let the oil splash on the table, if it is accidentally splashed on the table, be sure to clean it immediately, so as not to leave traces. Affect the appearance. Keep it clean: 1. Dust removal Because dust can rub the surface of solid wood furniture, it is necessary to remove dust frequently. Also, don't use a sponge or tableware cleaning tool to wipe your furniture. It is best to use a cotton cloth that has been wrung out after dampening to reduce friction and avoid scratching the furniture. It also helps to reduce the adsorption of static electricity by dust, which helps to remove furniture. Dust on the surface. However, water vapor should be avoided on the surface of the furniture. It is recommended to wipe it again with a dry cotton cloth. Second, avoid removing stains with alcohol, benzine or other chemical solvents. It can be gently wiped with warm tea water. Usually, the furniture can be coated with a thin layer of high-quality light wax, which not only maintains the solid wood furniture, but also adds light. 2. If the oil is stained, the residual tea is an excellent cleaning agent. After wiping, spray a small amount of corn flour to wipe it. Finally, wipe the corn flour. Corn flour absorbs all the dirt adsorbed on the furniture surface, making the paint surface smooth and bright. 3. For hardware decorative parts, do not use chemical-containing detergents, just wipe them gently with a dry cloth. 4. If the surface of the solid wood furniture is white wood lacquer, turn yellow for a long time, use a rag to wipe the toothpaste, be careful not to use too much force. You can also mix the two egg yolks, apply them with a soft brush to the yellow area, and dry them carefully with a soft cloth. Repair and maintenance: 1. Water marks Water marks usually take a while to disappear. If it is still visible after one month, use a clean soft cloth coated with a small amount of salad oil or mayonnaise to wipe the water mark in the direction of the wood grain. Or cover the mark with a damp cloth, then carefully press the damp cloth several times with an electric iron. 2. Hot mark: Use a dry, ultra-fine furniture to coat the special steel wool pad directly in the direction of the wood grain in the hot mark; you can also use salad oil or mayonnaise on the hot mark, take a soft cloth Gently wipe the wood grain, then wipe it with a clean soft cloth and finally polish it. 3. Burn marks: The cigarette butts or unfinished matches leave scorch marks on the furniture paint surface. If the paint surface is burning, you can put a fine cloth on the matchstick or toothpick, gently wipe the traces, and then apply a layer. Thin wax, the scorch marks can be diluted. 4. Scratch: If the furniture is scratched and the wood is not touched, it can be applied to the wound surface of the furniture with the same color of crayons or pigments as the furniture, to cover the exposed ground color, and then coated with transparent nail polish. One layer can be 5. Cracks, holes to find some useless old books, cut it into pieces, then add the right amount of alum, boiled with water, into the seam. It is also possible to adjust the wood chips evenly with white glue, embed them in cracks, and polish them with sandpaper after a night.
Drop-in kitchen sinks, also called self-rimming sinks, overmount sinks, or top-mount sinks, are sink basins that install and sit on top of your kitchen counter. There is a visible rim or lip on the perimeter of the basin that rests just over the cut-out for the sink. Drop-in sinks are supported by this lip and a series of hidden clips that attach to the underside of the countertop.
The Advantages of Drop-In Sinks
Drop-in sinks have some clear advantages over other styles, especially in the kitchen.
Cost
They`re generally cheaper to buy and easier to install than undermount sinks. In fact, even weekend warriors and DIY newbies should have no problem installing a basic overmount sink. If cost is a consideration in your kitchen, an overmount sink with a do-it-yourself install is a great way to stay within budget.
Cleaning
While cleaning may not be your foremost concern when choosing a kitchen sink, it should be considered. After all, you`ll have to care for and maintain your sink regularly. The basin of an overmount sink is easier to clean than the basin of an Undermount Sink.
Protection
If you`ve got soft countertops, drop-in sinks can help protect the edges of the sink cutout.
- Marble and some specialty counter finishes benefit from the added protection provided by the lip of a drop-in kitchen sink basin. It prevents the build up of water on the surface edges of the stone through repeated exposure of use.
- If you have laminate countertops, drop-in sinks are the only option: the particle board below the laminate surface isn`t strong enough to support undermount sinks but plays well with self-rimming basin types.
Top-Mount Sinks,Top Mount Kitchen Sink,Top Mount Stainless Steel Sink,Black Top Mount Sink
Guangdong Huayou Hardware Products Co.,Ltd , https://www.gudsink.com