The decoration partition wall material refers to the main material used as the partition wall in the house structure, which is not used to support the load-bearing interior wall. According to the partition walls, the places are different, and the basic requirements for partition walls are not the same. For example, the partition wall material of the kitchen should have fire resistance. The following small series is a brief introduction to the partition wall materials .
·Decoration wall material
1. GRC lightweight partition wall material: This is a kind of fiber cement composite material with alkali-resistant glass fiber as reinforcement material and cement mortar as matrix material. It has good tensile and flexural strength, as well as good toughness. Can meet the individual needs of the architect, suitable for the production of decorative shapes and used to express a strong sense of texture, complete the expression of decorative shapes and texture texture.
2, fiberboard wall: fiber reinforced low-alkali cement construction slab is mainly used for indoor non-load-bearing temples and ceiling panels.
3. Autoclaved aerated concrete slab: Autoclaved aerated concrete slab is a kind of light porous new type of green which uses cement, lime and silica sand as main raw materials and then adds different numbers of preservative treated steel mesh sheets according to structural requirements. Green building materials. Through high temperature and high pressure, steam curing, the reaction produces autoclaved aerated concrete slabs with porous crystals. The density of the autoclaved aerated concrete slabs is smaller than that of ordinary cement materials, and it has excellent fire resistance, fire resistance, sound insulation, thermal insulation, and thermal insulation.
4. Lightweight aggregate concrete slats: mainly composed of foamed lightweight aggregate concrete slats, with a layer of polystyrene foam interlayer in the foamed lightweight aggregate concrete slats.
5, steel mesh cement sandwich panels: The current use of color steel sandwich panels are mainly phenolic foam, polystyrene, extruded polystyrene, rigid polyurethane, tri-polyester and rock wool, etc., while the phenolic foam has The excellent fireproof and thermal insulation performance cannot be replaced by other materials.
6, gypsum wallboard: including paper gypsum board, gypsum hollow bar pull. Using building gypsum as raw material, add water to stir and cast lightweight building gypsum products. In the production, it is allowed to add fibers, perlite, cement, river sand, fly ash, slag, etc., with sufficient mechanical strength.
7, metal surface sandwich panels: including metal surface polystyrene sandwich panels, metal surface rigid polyurethane sandwich panels and metal surface rock wool, slag cotton sandwich panels. Metal-faced sandwich panels refer to upper and lower two-story metal sheets, and core materials are heat-insulating materials with certain rigidity, such as rock wool and rigid foam plastics. Also known as the "sandwich" board.
8. Composite lightweight sandwich panel: The panels used for the slats are various wall panels and hollow strips listed above. It is composed of two-sided medium-density cement fiber waterproofing board (100% asbestos-free) and light-weight aggregate concrete core (expanded perlite powder, polystyrene particles, light Portland cement, additives, etc.).
Information on the decoration partition wall material is introduced here for everyone. I hope this article will help you. If you still have anything you don’t understand, you can follow our website and we’ll get back to you as soon as possible.
Office Partition Wall Partition Bar Decoration Design Family Study Partition Decoration Design Fashion Kitchen Partition Decoration Design Home Bar Partition Decoration Design
Drinking Water Faucets, Drinking Water Tap, Kitchen Drinking Water Faucet, Stainless Steel Drinking Water Faucet
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsir-valves.com