For the US grout, we all understand it, it is a beautification products in the tile gap, can make the tile more beautiful and stylish, therefore, is widely used in home improvement, then, how to use that US grout it? Let's introduce in detail: What should we pay attention to in the construction method of the US grout and the construction of the tile grout? We hope to give you some help and inspiration.
US grout construction method:
1. The following tools should be prepared and gloves should be provided to prevent fingers from getting dirty.
2. Use a utility knife or brush to clean the dirt in the tile.
3. Apply embossed paper on both sides of the slit.
4. Install the sealant on the applicator.
5. Hold down the glue gun and hit the US sizing agent (Note: The gun must be at an angle of 45° to the ground and should be evenly spaced.)
6. Scrape the sealant with a squeegee.
7. Remove excess US grout with sponge.
8. Remove masking paper.
9. This beautiful grout construction is completed.
Tile beauty grout construction should pay attention to what:
After reading the above steps is not very simple? In fact, this idea is wrong, because the United States to fight the United States is a detailed sew, pay attention to a lot of details in the construction, otherwise it will affect the US grout's useful life.
1. During the construction, you can not poke with sharp objects, nor use strong acidic products, otherwise it will destroy the effect of the US sizing agent.
2. In operation, if a hollow drum is found, the US grout cannot be used because the empty drum is easily deformed beyond its pull range, so it will fall off as time passes.
3. Be careful to do it before the furniture enters the door, so that when moving the furniture, the effect of the US sizing agent will not be damaged. In addition, its construction requirements are very high, and the gaps must be thoroughly cleaned. Dust, water, oil and other impurities must not be left, otherwise it will affect the effect of the US sizing agent.
4. To use the sealant first, the smoother it is, the better the result.
5. It is a quick-drying product, one that is not available too much, preferably 1250px, and then use a wet sponge to remove the excess US grout, otherwise it will drop to the edge of the tile, affecting the overall effect of the tile.
6. Keep the product out of the reach of children.
7. After the construction is completed, it takes 24 hours to walk and it takes 72 hours to touch the water.
8. Wear rubber gloves when touching to avoid affecting your health.
Summary of the article: The relevant knowledge of the construction method of the US grout and the attention paid to the construction of the tile grout is introduced here . The construction method of the US grout is very simple, as long as the above step by step can be completed, but before the construction, certain To clean up the gap, otherwise it is easy to affect the overall appearance and useful life.
Pruning Scissors,Long Pruning Shears,Pruners Tools Scissors,High Carbon Steel Garden Scissors
ChongQing Troya Hardware Manufacture Co., Ltd , https://www.cqtroya.com