Some customers will find that the compensator will be damaged during the project trial. It is obvious that the same compensator is carefully selected. Why is it still damaged if it is installed carefully? In this case, it is necessary to consider whether there is a problem with the installation of the compensator? The following Jiu'an Jiu'an compensator has passed the years of experience for everyone to summarize the steps of correctly installing the corrugated compensator.
The main products of Jiu'an compensator manufacturers are corrugated compensator, sleeve compensator, metal hose, non-metallic compensator, retractor and other products. We are of high quality and reasonable price, welcome new and old customers to come to consult and purchase, consult the phone WeChat QQ
The bellows compensator should first be installed so that the bellows compensator is coaxial with the pipe. If there is a compensator that flows to the mark (arrow), the direction of the arrow represents the direction in which the medium flows, and must not be reversed. Secondly, the bellows compensator is usually a post-installation method, whether it is welded or flanged. That is, when the pipeline is installed, the bellows compensator is not installed first, and the whole straight pipe is directly passed at the position to be installed, and the guide bracket is installed according to the design requirements and the compensator manufacturer's requirements for the bracket setting near the compensator. And the fixing bracket, after the bracket meets the design requirements, the compensator is installed.
The steps to properly install the corrugated compensator are as follows:
(1) Temporary fixed settings are required during installation, and will be temporarily fixed after the installation is completed.
(2) Ensure that the installation direction is correct. When installing the compensator, the end of the compensator with the weld bead should be installed against the flow direction of the medium on the horizontal pipe, and the pipe and corrugated compensator should be concentric, not skewed.
(3) It is absolutely impossible to use the deformation of the compensator to adjust the installation deviation of the pipeline to ensure that the coaxiality error of both ends of the compensator is minimized, so as to ensure the normal operation and the service life.
(4) The external component cannot jam the active original on the compensator and cannot restrict its normal activities.
(5) If condensed water appears in the pipeline, then the installation of the sluice gate is required below the node.
Only after the correct installation of the corrugated compensator can the work of the compensator be effectively worked, and the corrugated compensator should also be economical and reasonable, so that it can be done while ensuring work efficiency. To save costs.
The above is the type of bellows compensator in the gas pipeline provided by the Jiu'an compensator. Jiu'an has also compiled a lot of knowledge about compensators for everyone. Please pay attention to: http:// Hope that everyone can fully grasp, thus greatly improving the operation level and laying the foundation for the good application of the compensator. Gongyi Jiu'an Compensator is a professional manufacturer of pipe equipment all the year round. We always adhere to the scientific and technological progress and constantly develop and enterprising business policy. Guided by the market, in good faith management, customer first, customer service, benefit the customer, quality first purpose. In order to truly achieve the benefit of the customer and unremitting struggle!
Http://news.chinawj.com.cn
GUANGDONG LAVIUS LIGHTING CO., LTD. , https://www.laviuslighting.com