Many families now choose to buy second-hand housing near the school for their children to go to school. After the house is in hand, the second-hand house will be renovated. When laying ceramic tiles, it is very important for the family to choose ceramic refurbishment paint , because it can save a large part of the cost. However, many people do not understand the methods and precautions for tile renovation. Next, the decoration home network Xiaobian will talk with you about the method of tile renovation, the relevant content of the tile renovation paint!
First, the method of tile renovation paint
1. Remove the original floor tiles. The original floor tiles have a small amount of damage, empty drums or falling off, the surface enamel has worn out, or it must be removed and replaced when it is seriously dirty. Simply repair the floor tiles that need to be refurbished.
2, the old tile surface directly paved with new tile bricks, if the original tile bricks have been partially damaged, more empty drums or fall off, the surface enamel has worn, or severely dirty, it must be removed and replaced, simple repair under normal circumstances not good. If you only consider replacing a few tiles, it is more difficult, because it is almost impossible to match the tiles of the same color, model and style after many years. Then only from the new shovel, from the new tiles.
3, the old tile or mosaic paint, the sale of brick wall renovation materials have tile surface treatment agent and tile, mosaic adhesive two, these renovation materials can be directly painted on the old brick surface, and then shop Save time and effort with new floor tiles. Renovation of old wall paint: Applying paint on old tiles or mosaics has higher requirements on the flatness of the wall and the putty layer. It is to paint the old tiles or mosaics, mainly to the clean and smooth surface.
Second, the precautions of tile renovation paint
1. Pay attention to the height difference: the original house is floor tiles for the living room floor, the floor is laid for the bedroom, and the cement mortar for laying the tiles will raise the ground so that there is a drop of 2 cm to 3 cm between the bedroom and the living room. In order to change this situation in the renovation of the old house, it is necessary to level the floor before laying the wooden floor in the bedroom.
2, pay attention to the ground circuit: When the old house is renovated and renovated, many families will carry out partial circuit transformation due to the reasons of adding sockets or changing the function of the room. The wires usually pass through the ground, and the country stipulates that the ground is not allowed to be excavated. Carry out the heighting and leveling, bury the pipeline on the ground with a leveling layer, and then lay the floor.
3. Leveling treatment in special cases: In some special cases, paving bricks also need to be leveled separately. For example, when the floor of a bungalow, a villa, etc. is placed in a new house, the ground treatment is rough, and some grounds are inclined in one direction, and some pits are very serious. If the initial renovation is not carried out, the old house will need to be leveled separately when it is renovated.
4, when the floor tiles are basically intact, you can not replace them, but you must remove all the floor tiles and joints in the later stage of decoration. Because there are a lot of bacteria or dirt in the seams of the tiles that have been used for a long time, they must be removed, and they will look more beautiful after re-stitching.
The above is the method of refurbishing the lacquer, the detailed answer to the precautions of the refurbishment of the tile, I don't know if you are satisfied with the introduction of the decoration home network. If you want to know more about the exciting content, please continue to pay attention to our home encyclopedia!
Self-Drilling Screw,Self Drilling Concrete Screws,Socket Head Cap Screw,Hex Head Self Drilling Screw
Taizhou Fengye Metal Products Co., Ltd. , https://www.fyhandware.com