Characterization and classification of INA thin-walled bearings

Home>Bearing knowledge>Characteristics and classification of INA thin-walled bearings
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131";

Characterization and classification of INA thin-walled bearings

Source: Bearing network time: 2017-10-15
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Thin-walled ferrule bearings are highly accurate, very quiet and highly load-bearing. These ball bearings are available in three styles; and the poles are small and the cross-sections are mostly square. In these series; even larger shaft diameters and bearing bores; The cross section is also constant. These bearings are therefore called equal sections (CS). It is this characteristic that differentiates the thin-walled ferrule bearings in the ISO series from conventional bearings. Thus; the ability to pick larger cross sections And the bearing can be used to strengthen the bearing without changing the shaft diameter. The thin-walled ferrule bearing can be described as a very light bearing that requires a small space.
Thin-walled ferrule bearings can be deep groove ball bearings (C), four-point touch bearings (X), angular touch ball bearings (E). The above various drawings are available in different series. The series depends on the cross section. The size of the ball. The ball matches the series.
Deep groove ball bearings are capable of supporting two-way axial loads as well as radial loads.
Four-point touch bearings are capable of supporting bidirectional axial loads as well as radial loads, so they operate in the same way as double row angular contact ball bearings.
The angular touch ball bearing can match the optimal number of balls and has a touch point of view of 30°. They support a higher radial load than deep groove ball bearings or four-point touch bearings; and can support axial loads originating from the same direction. Alignment is particularly desirable; angular touch ball bearings can also be supplied as mating bearings. Thus, the rigidity and load bearing capacity of these combinations is much higher than that of a single German INA bearing product.
Recommend to friends comments close window

Bearing related knowledge
The terminology and definition of bearing for the description of bearing speed limit (5)
Skill analysis: Rolling mill bearing features industrial pump and compactor for the size of the bearing
The reason for the deformation layer formed by the SKF imported bearing grinding force


This article links to http://
Please indicate China Bearing Network http://

Previous:

Stainless Steel Basin Faucets

Stainless steel Basin Faucet is a faucet made of stainless steel. Stainless steel is a healthy material, without lead, acid, alkali, corrosion resistance, does not release harmful substances, can ensure human health and hygiene. Stainless steel basin faucets are safe and lead-free, with no corrosion, exudate, or odor or cloudiness issues. It will not cause secondary pollution to the water quality, keep the water quality pure and hygienic, and fully guarantee the health and safety. Field corrosion test data show that stainless steel has a service life of up to 100 years and requires almost no maintenance during the life cycle, avoiding the cost and trouble of faucet replacement and low operating costs. Achieve the same service life of the stainless steel basin faucet as the construction.

Stainless Steel Basin Faucets,Waterfall Bathroom Faucet Black,Modern Basin Faucets Designs,Minimalist hand washing faucet

Kaiping Jenor Sanitary Ware Co., Ltd , https://www.sanitaryjenor.com