Processing of disc workpieces

1. The key of the disc type workpiece is the general material of the disc type. There are cast iron, forging parts, sawing or electric welding, gas cutting parts, but their common features are about 5~10mm. Most of the lathes Both use a three-jaw chuck to hold the remaining part. Then, in one turning forming, the starting point of the turning tool is far from the fulcrum due to the small clamping length. When the cutting force is multiplied by the clamping arm force when the cutting force is greater than the clamping force, the workpiece moves away, and the workpiece is severely loaded from the chuck. Falling down and causing an accident, the mechanic can only be processed with a small cutting amount, and the labor productivity is very low.

Stud Bolt

STUD BOLT: One fastener widely used, it is also called Threaded Rod or Tie Rod. It has no head and always full threaded. It can have chamfering and support logo Print. Our quality is great and aknowledged by many clients.

According to clients' demands, material can be Stainless Steel SS304/316/316L, Duplex Steel S32750/32760/2205/NAS660/904L..

The Standard is various, main standard is DIN/ANSI/GB, of course we also can accept JIS/BSW

Raw material should be cut in concrete length and processed by Cold/hot forge.surface finish,then can become various size fasteners.

Our Stainless Steel fasteners have great quality and are widely used in Heavy Industry.Shipping Industry.Construction Industry.Chemical Industry and Marine Industry.

Stud Bolt is one of our advantage Products. Chinese Manufacture, Qualified Hardware and Fasteners, Full size/Diameter/Tooth pitch, we all can satiafy your demands.

Stud Bolt,Stud Nut Bolt,Stud Anchor Bolt,Stainless Steel Stud Bolts

Taizhou Risco Stainless Steel Products Co.,Ltd , https://www.riscofastener.com