For bathroom and bathroom renovation, how to reflect its comfort and safety has become a focus of decoration. The decoration of the bathroom involves many details in the home decoration. If not handled properly, it will not only directly affect the quality of future home life, but will also affect the mood. Bathroom decoration should pay attention to the following points:
Cano tile   Carrie bathroom
First, the ceiling: Because the water vapor in the bathroom is relatively heavy, so we must choose those with waterproof, anti-corrosion, anti-rust characteristics of the material.
Second, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tiles are laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.
Third, the wall: wall tiles should also be good moistureproof and waterproof, and to ensure the formation of tiling flat, and to be seamed and aligned with the floor tiles, in order to ensure the integrity of the wall and the ground; if you encounter water supply pipeline exit The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
Fourth, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
V. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the location Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
Sixth, waterway transformation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as the washing machine model, the location of the water will be different.
VII, sanitary ware installation: It is best to remember the hole distance before the decoration, according to the size of the bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet installation should be used to sit The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
8. Ventilation and ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must have a retrograde gate to prevent the backflow of dirty air.
9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-resistant, hi-potted pots to be placed in the bathroom, making it a little more angry.
Bathroom Notes Zhongyu Bathroom Window Glass Switch Home Decoration Socket Glass Tile Glass Sliding Door Glass Door Bathroom Sliding Door Bathroom Tile Bathroom Door Toilet Ceiling Material Bathroom Wall Tile Toilet Door Size Bathroom Size Toilet Ceiling Bathroom Wash Basin Total Bathroom Toilet Waterproof Bathroom Tile Tile Tile Adhesive
The structure of the core barrel is generally divided into single - acting double core tube and most of the fishing apparatus. The double tube section consists of an outer tube assembly and an inner tube assembly. The outer pipe assembly includes; The main structure and working principle of the cartridge stopper, cartridge chamber, stable joint outer pipe, diamond reamer and diamond bit are as follows:
(1) Spear structure is composed of spear head and recovery spring. When coring, the fishing device is lowered to the upper part of the inner tube assembly in the drill pipe, and the fishing hook grasps the fishing spear, lifts the fishing device up, picks up the recycling card barrel, and inwardly compressing the cartridge card, so that the inner tube assembly and the outer tube are separated, so that the inner tube assembly is lifted up.
(2) The clip structure is mainly composed of the clip frame, clip, spring and other components. Its function is that when the inner tube sits on the outer tube, the clip expands with the help of the elastic force of the expansion spring and sticks to the inner wall of the clip chamber, so that the drilling tool can achieve positioning.
(3) Buffer structure by spring, locking mother, split pin composition. Protecting the inner tube when pulling the core.
(4) Single action structure is realized by two pairs of thrust bearings.
(5) Adjust the length of the inner pipe assembly and the outer pipe assembly of the structure, and fine-tune the lower shaft and the locking mother to achieve the gap required by the end of the spring seat and the step inside the drill bit.
(6) The fishing structure, also known as the fishing device, is mainly composed of fishing hook, hammer and safety rope. The fishing hook is used to hold the spearhead while fishing the inner pipe, and the weight is used to speed up the fishing device's descent to save fishing time. The safety rope is a thin rope. When the inner pipe is stuck for some reason and cannot be lifted, the safety rope can be forcefully lifted and then the drill can be lifted.
Other Parts,Spearhead Base,Compression Spin,Core Lifter
wuxi shengmeirun trading co.,ltd. , https://www.wxsmrxz.com