Pop-up floor socket purchase skill floor socket installation method

The socket is one of the inseparable pieces of hardware in our family. When we choose it, because we know its importance, everyone cares about its quality. There are a lot of socket quality, and the pop-up floor socket is just one of them. Do you know how to choose it? Today, everyone will take a look at the pop-up floor socket purchase technique and the pop-up floor socket. Installation method!


弹起式地板插座


Pop-up floor socket purchase tips


1. The power socket should adopt the products that have passed the inspection by the relevant product quality supervision department of the state.


2. The power socket in the house should adopt a safety socket, and the wet place such as the bathroom should adopt a splash-proof socket;


3. The rated current of the power outlet should be greater than 1.25 times the rated current of the known equipment. Generally, the rated current of single-phase power socket is 10A, and the dedicated power socket is 16A. The distribution circuit and connection power mode of special high-power household appliances should be selected according to actual capacity;


4. For the convenience of plugging, the number of combined sockets is preferably two, and the maximum (including the switch) is no more than three;


5. For household appliances that are in danger of electric shock due to plug-in power supply, use a socket with a switch to disconnect the power supply.


6. In a relatively humid place, install a socket and install a waterproof box at the same time.


弹起式地板插座


Pop-up floor socket installation method


1. Select the positioning of the steel bottom box, and open a square hole on the floor where the socket needs to be installed according to the drawing. The size of the hole is 5mm larger than the outer shape of the bottom of the box;


2. Calculate the problem of installation depth. Generally, the upper end surface of the bottom box of the socket should be lower than the floor 3~5mm, and the depth can also be adjusted according to the actual situation by increasing or decreasing the gasket;


3. Fix the bottom of the box on the anti-static floor with self-tapping screws, so that the bottom of the box is installed successfully;


4. Clean and wipe the floor around the hole to prepare the socket cover.


5. When installing a ground socket with a strong electric socket, the ground connection of the upper cover must be reliably connected with the steel bottom box;


6. Finally, screw the upper cover and the steel bottom box with screws to fix them.


When we choose to use the pop-up floor socket, we need to learn how to choose, and the installation needs us to understand. The above is the editing method of the pop-up floor socket introduced by Xiaobian today and the installation method of the pop-up floor socket is here. For more information, please continue to pay attention to the decoration home.


More related wonderful reading:

Pop-up floor socket purchase pop-up floor socket installation


Metal Trash Can

Metal Trash Can,Metal Bucket Trash Can,Trash Can With Lid,Galvanized Trash Can With Lid

xiacun factory , https://www.xiacunmetal.com