First, it varies from person to person
The type of wooden floor is selected according to economic conditions, room size, floor height and length of stay. The long strip floor and the parquet floor can be laid without glue, and it is easy to disassemble when relocating; the short strip parquet floor is generally laid by gluing method, but it is difficult to disassemble.
Second, the processing size should be accurate
The processing error of wooden floor should be small, the geometrical size should be regular, and the slats should be flat, especially the width direction and the size of the gutter of the cornice are more important, generally less than or equal to 0.5 mm.
Third, the board should be smooth and smooth.
There are no obvious knife marks on the front side, and there are a little leakage planing or sawing marks on the reverse side. The grooved groove shape should be tight and proper, smooth and free, neither blocking nor obvious gap.
Fourth, the wood defect should be limited
Authentic straight lines are obvious and parallel, and achieve "ten no", no scars, no insects, no decay, no blunt edges, no cracks, no distortion, no twill. In particular, there should be no blunt edges to avoid affecting the paving.
Fifth, the strength of wood should be adapted to local conditions
In general, the higher the density of wood, the greater the strength and the better the quality. However, the choice of floor strength can vary depending on the location of use. For example, in the living room, dining room, and public places, the variety of floor strength can be selected, and the bedroom should be selected from the varieties with relatively low floor strength, such as ash, beech, and the like. Some elderly people can choose Liu Yan, Southwestern Birch, etc., which are generally soft and warm.
Sixth, the wood must be dried
In addition to the inherent thermal expansion and contraction characteristics of wood, wood also has the characteristics of wet expansion and contraction. Therefore, the drying process in the production process of wooden flooring is an extremely important process, and the quality of the treatment has a great influence on the quality of the floor. The moisture content of wooden floors is generally required to be controlled below 15%, and 8% to 12% is optimal. The water content in the north can be below 12%, the climate in the south is humid, and the water content can be below 15%. The method of distinguishing whether the wooden floor has been dried is: touch it by hand or measure with a moisture meter.
Seven, it should not be too wide and too long
In general, the shorter and narrower the wooden floor, the more secure and smooth it can be laid. Long strips are generally about 2 meters long and 80 mm wide. If the floor is too long, the processing curvature is large, it is not easy to lay, and it is easy to loose. In addition, the floor is too long and too wide, and the dry shrinkage and wetness are large, and warping deformation and cracking are easily generated.
Eight, is the purchase quantity should be slightly surplus floor purchase
When consumers buy wooden flooring, the first thing they think of is solid wood flooring, because it is the most traditional, most popular, and most popular floor. The types of flooring that have appeared on the market today are: tongue and groove floor, flat floor; There are: integrated floor, refers to the grounding plate; especially presenting the sense of the times, individualized: parquet floor, vertical wood floor and so on. For the time being, most consumers prefer the floor of the tongue. After determining the type of flooring, please follow the steps below to purchase:
Portable spectrophotometer,45/0 spectrophotometer,Hardware spectrophotometer
CHNSpec Technology (Zhejiang)Co.,Ltd , http://www.chnspec.xyz