Bathrooms stay three dead corners firmly do not suffer from sequelae

Almost every home that has been renovated will have some regrets, either due to poor design considerations or negligence during the renovation process, leaving “sequel”. Especially in the bathroom, don't underestimate this inconspicuous place. Without a complete design, the decoration here will also be a mess. Whether it is a decoration company or a consumer, as long as you pay little attention, you will leave a “dead corner” and add trouble to your future use.


Wrigley bathroom     Elegant high tiles

The "dead ends" mentioned here mainly include the following three aspects:

I. Insufficient consideration before purchase

According to reports, in recent years, consumers have become more and more willing to spend money on bathroom renovation, and in addition to construction, follow-up investment is also very large, usually only the cost of buying sanitary ware will probably account for the total number of decoration 1/8 about. As a variety of bath products variety, the price varies from a few hundred dollars to a dozen yuan a huge difference, consumers buy in the home improvement market, often pick their eyes, buy home only to find that their bathroom is not coordinated .

Reminder: Consumers should consider what kind of products they would like to purchase at the design stage. During construction, they can set aside space, remodel pipelines and create installation conditions according to the specific installation requirements and technical parameters of the products they purchase, and ensure that the decoration process can Successfully completed, sanitary products can be installed and used normally.

Second, the water circuit reform without plans can be

Under normal circumstances, the decoration company will draw the decoration design drawings for the owners, including the overall renderings, detailed construction drawings and water circuit transformation plans. However, due to inadequate communication between the owner and the designer in advance, the owner did not consider it properly. With the progress of the construction, he proposed amendments to the original design. As a result, the construction of the concealed works, such as the alteration of the water circuit, was found to have no plans. , leaving hidden dangers for subsequent construction.

Reminder: There are water circuits in the bathroom that need to be reconstructed. Consumers must ask the designer in advance for a circuit renovation plan. If there is a change in the construction process, consumers must communicate with the designer to draw a transformation plan again, and then begin. Construction, it is best not to modify the edge of the construction, so as not to damage the wires caused by the construction of the wall in the future.

Third, the design is inelastic

This situation is more common in the bathroom. If the wall socket is fixed, it is found that the height of the ceiling is in direct conflict with it, but at this time, the tiles have been attached and it is difficult to change. Also, if the washbasin is in place, it is found that the pipeline cannot pass through, and only a few more bends are required to pass through the bathroom cabinet.

Reminder: Before purchasing sanitary products, consumers must consider whether the existing design scheme and future construction are feasible and flexible. If the faucet needs to embed a suitable water supply pipe, the bathroom cabinet requires sufficient space for installation. The toilet seat needs to consider the wall distance. The shower room needs to consider the load-bearing wall and the location of the floor drain. These conditions must be met in the home improvement construction. Caixing, otherwise sanitary products can not be installed and used.

Sanitary ware bathroom villa design home decoration space bathroom decoration design socket decoration ceiling renderings decoration decoration company look good bathroom decoration renderings tile price ld tiles

Other Commodity Mould

Tube Fitting Mould,Pipe Fitting Mold,Plastic Fitting Mould

Auto Parts Mould,Commodity Mould Co., Ltd. , http://www.refinemoulds.com